Heater And A/C Unit Bracket, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Install in the reverse order of removal while noting the following:

-- Insert the bracket -1- and -3- into the mount on the heater and A/C unit -2- and bring the heater and A/C unit into the installation position.

-- Install the heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .

-- Tighten the nuts -3- and -5- on the brackets.

Courtesy of AUDI OF AMERICA, LLC

-- Install the remaining components.

-- Check the DTC memory and erase any displayed entries using the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

-- Check the heating and A/C system function.