LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Air Conditioning (Heating, Ventilation And Air Conditioning)) >> 87 Air Conditioning >> Additional Components For Control And Regulation >> Left Vent Temperature Sensor -G150-, REMOVING AND INSTALLING >> Installing

Left Vent Temperature Sensor -G150-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Replace the seal -3- if it is damaged or faulty.

-- Connect the connector -2-.

-- Place the Left Vent Temperature Sensor -G150- -1- in the mount and turn it 90°.

NOTE:

An incorrectly installed vent temperature sensor causes flow-generated noise.

-- Check the DTC memory and erase any displayed entries using the Vehicle Diagnostic Tester Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

scientia non olet · About LEMON Manuals