Overview - Bench Seat

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bench Seat

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING .
Headrest Guide
- Quantity: 4
- Replace if damaged
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING .
Locking Mechanism Trim
- Removing and Installing. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .
Bench Seat
- Removing and Installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
Bolt
- Quantity: 5
- 40 Nm
Backrest Adjustment Wheel Handle
- Removing and Installing. Refer to BACKREST ADJUSTMENT HANDLE, REMOVING AND INSTALLING .
Footwell Trim Panel
- Removing and Installing. Refer to FOOTWELL TRIM, REMOVING AND INSTALLING .
Bolt
- 3 Nm
Outer Trim Panel
- Remove the bolt -10-
- Remove sideways
Bolt
- 3 Nm
Side Cover
- Remove upward
Bolt
- 12 Nm
Side Cover Bracket
- Remove the bolt -12-.
- Remove sideways
Front Trim Panel
- Removing and Installing. Refer to FRONT TRIM PANEL, REMOVING AND INSTALLING .
Side Cover
- Unclip downward
Inner Trim Panel
- Remove the bolt -17-.
- Remove sideways
Bolt
- 3 Nm
Guide
- Removing and Installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
- For the LATCH child seat anchor
- Quantity: 4
Bolt
- 10 Nm
Center Armrest
- Removing and Installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING .