LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Seat Upholstery, Covers) >> 74 Seat Upholstery, Covers >> Second Row Seat Covers And Cushions >> Backrest Heating Element, Removing And Installing >> Installing

Backrest Heating Element, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Guide the wire -3- through the cable guide.

-- Align the heating element -2- on the cushion -1- at the same time do not remove the protective film.

-- Remove the protective films -4- one after the other from the adhesive tape -2- at the same time do not damage the heating element.

-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.

-- Position the connections of the individual heating elements in the cushion guides.

scientia non olet · About LEMON Manuals