Overview - Backrest Cover And Cushion

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Backrest Cover & Cushion

Courtesy of AUDI OF AMERICA, LLC

Upholstery Clip
- For attaching the backrest cover to the backrest cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers:V.A.G 1634 .
Molding Strip
- Sewn into backrest cover
- A zipper is installed instead of a molding strip on seats with a pass-through
- "Zipper" allocation. Refer to the appropriate Electronic Parts Information.
Backrest Cover
- Different equipment levels
- Allocation. Refer to the appropriate Electronic Parts Information.
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Backrest cover and backrest cushion, separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .
- Check that there are no folds after installing
Clip
- For securing the backrest cover on the rear frame
- Right and left
Backrest Frame
Backrest Cushion
- Allocation. Refer to the appropriate Electronic Parts Information.
- Backrest cover and cushion, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Backrest cover and backrest cushion, separating. Refer to BACKREST COVER AND CUSHION, SEPARATING .