Driver Seat Heating Element -Z6- /Front Passenger Seat Heating Element -Z8-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The passenger occupant detection system removal and installation information must be used for passenger seats equipped with seat occupant detection system. Refer to PASSENGER OCCUPANT DETECTION SYSTEM PRESSURE SENSOR, REMOVING AND INSTALLING .
-- Separate the seat cover from the seat cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING .
-- Disconnect the wire -5- directly from the old heating element -2-.
NOTE:
The old heating elements remain on the cushion -1- and will be covered over by the new heating element.