Driver Backrest Heating Element -Z7- /Front Passenger Backrest Heating Element -Z9-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Guide the wire -3- through the cable guide.
-- Align the heating element -2- on the cushion -1- at the same time do not remove the protective film.
-- Remove the protective films -4- one after the other from the adhesive tape -2- at the same time do not damage the heating element.
-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.
-- Route the connections to the individual heating elements in the base of the gaps.