Required Importer Notification (Not For NAR

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

After installing the new components of the passenger occupant detection system (Passenger Occupant Detection System Pressure Sensor -G452- /Passenger Occupant Detection System Control Module -J706-), attach the labels (only tear-off strips) of the new components on the "registration card 2 for airbag systems". "Registration card 2 for airbag systems" should be sent to importer for registration.

The "registration tag 2 for airbag systems" can be printed from the "Technical Service Handbook" :

ElsaWin

→ Technical Service Handbook (HST)

→ Technical Service Bulletin (TSB)

→ Electrical system

→ Function

→ Passenger protection area

→ Turning off the airbag unit/child seat, installing a set, etc.

→ System 2

The "process ID" and "TPI number" for this procedure can be found in "Technical Service Handbook 2" : "2022327/1"