Passenger Occupant Detection System Pressure Sensor, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine/Transmission Holder - Seat Repair Fixture:VAS 6136

Fig 1: Engine/Transmission Holder
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Engine and Transmission Holder:VAS 6095A

Fig 2: Engine And Transmission Holder
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The passenger occupant detection system pressure sensor and the front seat cushion can only be replaced as one unit.

The Passenger Occupant Detection System Control Module -J706- may be replaced separately.

Removing and installing the passenger occupant detection system pressure sensor is described for the "Comfort" front seat with manual seat adjustment.

Removing and installing on the other versions of the front seat is identical.