Seat Belt Height Adjuster, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the seat belt height adjuster slider to the lowest position.

-- Remove the B-pillar upper trim panel (refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING ) and move it to the side with the seat belt webbing.

-- Remove the bolt -4-.

-- Remove the seat belt relay -1- with the seat belt webbing.

-- Remove the bolt -3-.

-- Remove the seat belt height adjuster -2- upward from the B-pillar.