Brake Caliper, Removing And Installing, Front Brakes: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the wheel from the affected front side.
-- Disconnect the brake pad wear indicator connector.
-- Attach the bleeder bottle bleed hose -1- to the brake caliper bleed valve.
-- Open the bleeder valve.
-- Insert the :VAG1869/2 .
-- Close the bleeder valve and remove the bleeder bottle.
-- Remove the brake hose.
-- Counterhold the guide pin and remove both bolts from the brake caliper.
-- Remove the brake caliper from the brake carrier.