Right Front ABS Wheel Speed Sensor -G45- /Left Front ABS Wheel Speed Sensor -G47-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Before inserting the speed sensor, clean the inner surface of the hole and coat speed sensor all-round with Hot Bolt Paste:G 052 112 A3 .
Tightening Specification
- Refer to OVERVIEW - FRONT AXLE SPEED SENSOR