Stabilizer Bar, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following work steps are described for the left side of the vehicle. These work steps also apply At the same time for right side of vehicle.
Vehicles with Rear Axle Trim Panel
Continuation for All Vehicles
-- Remove the bolts -arrows- for the stabilizer bar -1-
-- Remove the bolt -1- from the stabilizer bar -2-.
-- Remove the stabilizer bar -2- from the subframe.