Coupling Rod, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

-- Secure both sides of the vehicle on the hoist lifting arms using the :T10038 .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Tensioning Strap:T10038

WARNING:

The vehicle could slide off the hoist if it is not secured.

-- Position the : VAS6931 or :VAG1383A under the transverse link upward.

-- Slightly push the lower transverse link upward.

-- Remove the bolt -1- from the stabilizer bar -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nut -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -2-.

-- Remove the coupling rod -3-.