Inner CV Joint, Checking: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Direction To Press Out Ball Joint Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tilt the ball hub and ball cage.

-- Remove the joint in the direction of the arrow.

-- Remove the balls from the cage.

-- Flip out ball hub from ball cage via the ball race -arrows-.

Fig 2: Flip Out Ball Hub From Ball Cage Via Running Path Of Ball -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check the joint, ball hub, ball cage and balls for small broken off depressions (pitting) and chafing.

NOTE:

Excessive backlash in joint will be noticed as a knock during load changes. Joint must be replaced in such cases. Flattening and running marks on the balls are no reason to replace the joint.