Tie Rod, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the wheel bolts.
-- Raise the vehicle.
-- Remove the wheel.
-- Remove the bolts -arrows- for the stabilizer bar -1-
-- Loosen the nut -1- and the bolt -3- several turns.
-- Remove the bolt -3-.
-- Remove the nut -1- and remove the bolt -4- toward the rear while pressing the stabilizer bar upward.
-- Remove the tie rod -2-.