Tie Rod End, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Make sure the correct tie rod end is installed on each side.

Courtesy of AUDI OF AMERICA, LLC

Left Tie Rod End
Right Tie Rod End

-- Turn the tie rod end to marking made earlier on the tie rod and secure it with a locking nut.

-- Install the tie rod end into the wheel bearing housing.

-- Install the tie rod end with a new nut.

-- Install the wheel and tighten.

-- Perform a vehicle alignment. Refer to AXLE ALIGNMENT PROCEDURE .