SUBFRAME Without Steering Gear, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following:

-- Position the steering gear -1- on the subframe.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- The steering gear threaded sleeves -2- must be inserted into the subframe holes -arrow-.

-- Tighten the nuts -arrows-.

Fig 1: Identifying Nuts, Tightening

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- For vehicles with a level control system sensor, perform the basic setting using the Vehicle Diagnostic Tester.