Front Wheel Housing Liner, Removing And Installing: Notes
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1783 - 2-10Nm:V.A.G 1783
NOTE:
The following describes the removal and installation of the left front wheel housing liner. The right side is identical.
Depending on the model version, slight differences must be considered when removing and installing.
For a better view of the screws, the wheel is not shown in the illustration.