Bonded Name Badges, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A

Fig 1: Hot Air Blower VAG1416
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Adhesive Strip Remover:VAS 6349

Fig 2: Adhesive Remover VAS 6349
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The height and side dimension of the name badges for the different engine types is identical.

Pay attention to the following assembly instructions when installing the name badges.