Overview - EVAP System, Without Fuel Tank Leak Detection
WARNING: This page is about a different car, the 2023 Volkswagen Atlas. However, it is still accessible from the selected car via links, so may be relevant.
- Bleeder Line
- To the EVAP Canister Purge Regulator Valve 1 -N80-
- Clipped to the fuel tank
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Connection Diagram. Refer to Fig 2.
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to check for secure fit.
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Bolt
- 20 Nm
- EVAP Canister
- Component location: at the right rear in the wheel housing under the wheel housing liner
- Removing and installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Bleeder Line
- To the fuel tank
- To disconnect, press the release button on the connecting piece
- The connector couplings must >>audibly<< engage when locking.
- Pull on the connector coupling to check for secure fit.
- Connector Couplings, Disconnecting. Refer to CONNECTOR COUPLINGS, DISCONNECTING .
- Ventilation, Checking. Refer to FUEL TANK, CHECKING VENTILATION .
- Connection Diagram. Refer to Fig 2.
Connection Diagram on EVAP Canister
- -A- Vent Connection
- -T- Connection to Fuel Tank
- -M- to EVAP Canister Purge Regulator Valve 1 -N80-
- Cap