Brake Pedal, Removing And Installing, RHD Vehicle: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Replace the bearing pin and the nut.
Conditions
- Do not lubricate or grease the mounting pin. The mounting pin must remain dry.
-- Push the mounting pin from the left to the right through the mounting bracket and brake pedal.
-- Install the nut on the mounting pin and tighten.
-- Further installation is performed in reverse order of the removal.