Brake Booster -NX6-, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Brake Filling and Bleeding Equipment: VAS6860
- Mini Torque Wrench: VAS6854
- Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A
- Torque Wrench - Assembly Tool : VAG1410/8
- Open Ring Spanner Insert - AF 11mm: VAG1410/6
- Socket/Bit Set - 39 Piece: VAS6928
- Torque Wrench - Universal Joint : VAG1410/7
- Engine Bung Set: VAS6122
The Brake Booster -NX6- will be called brake booster in the information that follows.
For the plug assembly parts refer to the Parts Information.
- M10 plugs
- M12 plugs