Spring, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Thrust Plates: VAS 6274/16
- Supplementary Kit: VAS 6274/15A
- Supplement Set: VAS 6274/12
- Spring Tensioning System: VAS 6274
- Spring Tensioning System - Spreader Device: VAS 6274/8
The following information describes the removing and installing on the left side of the vehicle as an example.