Transmission Mount, Replacing: Notes

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Bearing Installer - Wheel Hub/Bearing Kit - Thrust Piece: T10205/13
Pneumatic/Hydraulic Foot Pump: VAS 6179
Hydraulic Press: VAS 6178
Assembly Tool: T10620
Bearing Installer - Wheel Hub/Bearing Kit - Nut: T10205/8-2
Spindle: T10620/17

The following information describes the removing and installing on the left side of the vehicle as an example.

Conditions

The help of a second person is necessary for the following procedure.

Necessary tools and aids from the Assembly Tool: T10620 :

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

K - Spindle: T10620/17

L - Spindle: T10620/4

M - Thrust Piece: T10620/14

N - Thrust Piece: T10620/12

O - Thrust Piece: T10620/15

P - Thrust Piece: T10620/13

Q - Thrust Piece: T10620/16

U - Bearing Installer - Wheel Hub/Bearing Kit - Nut: T10205/8-2

V - Hydraulic Press: VAS 6178

W - Bearing Installer - Wheel Hub/Bearing Kit - Thrust Piece: T10205/13

6 - Nut for the Spindle: T10620/4