Steering Gear, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Position the steering gear -1- on the subframe -2-.
The threaded bushings -3- of the steering gear -1- must be inserted into the holes -arrows- of the subframe -2-.
Continuation
-- Perform the necessary Function/Functions with the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .