Washer Nozzle, Removing And Installing, Rear Window Washer System: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the spoiler trim support. Refer to SUPPORT FOR SPOILER TRIM, REMOVING AND INSTALLING .
-- Remove the rear lid upper trim panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Release and remove the washer fluid hose -2-.
-- Disconnect the connector -3-.
-- Remove the wiring harness -1- with grommet -4- rearward.
-- Pull the washer nozzle with the washer fluid hose -1- and the wire -3- through the grommet -2-.
-- Disconnect the washer nozzle with washer fluid hose -1- from the wire -3-.
-- Remove the washer nozzle with washer fluid hose -1-.