Burglary Protection Control Module 2 -J1192- / Burglary Protection Control Module 3 -J1193-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Release the tabs -2-.
-- Remove the burglary protection control module -1- in the direction of -arrow-.