Rear Lid, Adjusting: Notes
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Adjustment Gauge: 3371
Preparing
Requirement
- When adjusting the rear lid, the vehicle must be resting on its wheels on a level surface.
- The rear lid must engage in the striker without great force.
The rear lid is correctly installed, when it is closed and:
- The gap dimensions are even.
- The contours align.
- The rear lid is not positioned too far inward or outward.
The procedure shown is for the left side of the vehicle as an example.
-- Loosen the striker. Refer to Striker, Removing and Installing .