Power Rear Lid Opening Sensors G750/G760, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Roller: T40400
- Wiring Harness Repair Set - Hot Air Blower: VAS 1978/14A
Power Rear Lid Opening Sensor -G750- and Power Rear Lid Opening Sensor 2 -G760- will subsequently be called the power rear lid opening sensor.
Requirement
- Procedures and guidelines for temperature, minimum curing time, cleaning, removing adhesive residue must be complied to. Refer to Installation Requirements for Components with Adhesive Tape .