Hood, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the washer nozzles. Refer to WASHER NOZZLES, REMOVING AND INSTALLING .
-- Remove the washer fluid hose and wires -4-.
-- Loosen the nuts -2- on the hinges -3-.
Requirement
- The help of a second person is necessary for the following procedure.
-- Unhook the support rod -6- from the hood -1-.
-- Remove the nuts -2-.
-- Remove the hood -1-.