Bumper Cover, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
New bumper cover for vehicles with Power Rear Lid Opening Control Module -J938-
-- Install the Power Rear Lid Opening Control Module -J938-. Refer to POWER REAR LID OPENING CONTROL MODULE J938 .
Continuation for all vehicles
-- Check the body gap dimensions using the Gauge - Gap Adjustment :3371 . For this, pay attention refer to Body Gap Dimensions; Body Rear.