Side Marker Reflector, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover reinforcement. Refer to Bumper Cover Reinforcement, Removing and Installing .
-- Remove the bolt -1-.
-- Remove the guide -2-.
-- Heat up the side marker reflector -3- in the area near the adhesive tape -4- using the Hot Air Blower :V.A.G 1416 . Refer to the appropriate service information .
-- Remove the side marker reflector -3- in the -direction of arrow A-.