Side Marker Reflector, Removing And Installing: Notes

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wiring Harness Repair Set - Hot Air Blower :VAS 1978/14A

The following information describes the removing and installing on the left side of the vehicle as an example.

Requirement

Procedures and guidelines for temperature, minimum curing time, removing adhesive residue and cleaning must be complied to. Refer to Installation Requirements for Components with Adhesive Tape .