Rear Parking Aid Sensors G203/G204/G205/G206, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Exterior Sensors:

-- Press the hook in the direction of -arrow- and at the same time press the sensor -1- from the outside to the inside.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2- and remove it straight off the parallel sensor -1-.

-- Remove the sensor -1-.

Interior Sensors:

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Press the hook in the direction of -arrow- and at the same time press the sensor -1- from the outside to the inside.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2- and remove it straight off the parallel sensor -1-.

-- Remove the sensor -1-.

Continuation for All Vehicles