Front Roof Module WX3, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damaging component surfaces.
- When positioning a prying tool, put commercially available adhesive tape over the component in the visible area.
-- Pry out the roof module -1- in the rear area in the direction of -arrow A- using a commercially available plastic wedge.
-- Disconnect the connectors.
-- Remove the roof module -1- in the direction of -arrow B-.