Rear Seat Backrest Cover And Cushion, Separating: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Secure the upholstery clips in the sequence -1- through -11- using Upholstery Clip Pliers: V.A.G 1634B .
-- Secure the upholstery clips -12- to -15- for the rear seat backrest without pass-through.
-- Make sure the cover is installed without any wrinkles.