Passenger Occupant Detection System Control Module J706, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Refer to Front Seat, Mounting on Fixture for Seat Repair .
-- Unclip the wire from the bracket -3-.
-- Disconnect the connector -2-.
-- Pull out the locking pin from the bracket -3- entirely.
-- Unclip the occupant detection control module -1- in the -direction of arrow A-.
-- Remove the occupant detection control module -1- in the -direction of arrow B-.