LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Seat Belt Height Adjuster, Removing And Installing >> Installing

Seat Belt Height Adjuster, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Tip

A replacement seat belt height adjuster is always delivered with the slider for the seat belt height adjuster in the lowest position (installation position).

Tip

If a seat belt height adjuster that was removed is reinstalled, then bring the height adjuster into the lowest position (installation position).

Tip

The seat belt height adjuster must engage audibly in each possible position.

Tip

The seat belt relay must swing by itself into the vertical position or towards the carrier after the screw is tightened.

scientia non olet · About LEMON Manuals