Overview - Front Three-Point Seat Belt

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

The overview shows the left side of the vehicle as an example

Fig 1: Exploded View Of Front Three-Point Seat Belt

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 40 Nm
Bolt
- 20 Nm
Seat Belt Height Adjuster
- Refer to Seat Belt Height Adjuster, Removing and Installing .
Front Seat Belt Guide
- Refer to Front Seat Belt Guide, Removing and Installing .
Connector
Connector
Front Three-Point Seat Belt, Base Version
- Depending on equipment/version
- With Driver Seat Belt Tensioner Igniter 1 -N153- or Front Passenger Seat Belt Tensioner Igniter 1 -N154-
- Refer to LEFT/RIGHT FRONT SEAT BELT NX10/NX11, REMOVING AND INSTALLING .
Front Three-Point Seat Belt, Power Reversible Version
- Depending on equipment/version
- Left Front Seat Belt - NX10- or Right Front Seat Belt - NX11-
- With Left Front Seat Belt Tensioner Control Module -J854- or Right Front Seat Belt Tensioner Control Module -J855-
- With Driver Seat Belt Tensioner Igniter 1 -N153- or Front Passenger Seat Belt Tensioner Igniter 1 -N154-
- Refer to LEFT/RIGHT FRONT SEAT BELT NX10/NX11, REMOVING AND INSTALLING .
Nut
- 40 Nm
Front Belt End Fitting
- With Driver Seat Belt Tensioner Igniter 2 -N297- or Front Passenger Seat Belt Tensioner Igniter 2 - N298-
- Refer to Front Seat Belt Guide, Removing and Installing .
Connector
Bolt
- 40 Nm
Connector
Expanding Rivet