LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belt Fastening Detection >> Passenger/Driver Side Seat Occupant Detection Sensor G1067/G128, Removing And Installing >> Removing

Passenger/Driver Side Seat Occupant Detection Sensor G1067/G128, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat all the way back and to the highest position.

-- Disconnect the connector -2-.

GWWA69-11090Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the mount -1- -arrows-.

-- Remove the passenger occupant detection sensor -3- by pressing the cushion slightly upward.

scientia non olet · About LEMON Manuals