LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Passenger Protection, Airbags, Seat Belts) >> 69 Passenger Protection, Airbags, Seat Belts >> Driver Side Airbag >> Airbag Connector, Replacing >> Removing

Airbag Connector, Replacing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

The airbag unit with Driver Airbag Igniter - N95- will be called the airbag unit with igniter in the information that follows.

-- Remove the airbag unit with igniter. Refer to Airbag Unit with Driver Airbag Igniter N95, Removing and Installing  .

CAUTION:

Pyrotechnical components can deploy unintentionally.

Risk of injury.

- Discharge the static electricity: quickly touch the door striker.

-- Disengage the wire at the brackets.

GWWN69-11138Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unpin the wire from the connector -1-.

-- Disconnect the connectors.

-- Release the connector lock -2- in the -direction of the arrow-.

Fig 1: Disconnect Harness Connector -1-, Connector Lock -2-
GWWA69-10573Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1-.

-- Detach the wire.