Pass-Through Cover Frame, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

-- Fold down the center armrest and open the pass-through door.

-- Release the hook -2- using the Trim Release Lever: T40207 -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the door locking mechanism trim -1- in the -direction of the arrow- using a commercially available plastic wedge.

-- Pry the pass-through cover frame -2- off the rear seat backrest -1- in the -direction of arrow A- using a Trim Release Lever: T10039 -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Continue prying off starting at the upper left corner in -direction of arrow B-.

-- Remove the pass-through cover frame -2-.

-- Press the rear seat backrest cover and cushion to the side slightly and unclip the stop strip -1- in the -direction of the arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the stop strip -1-.