Locking Mechanism Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the headrest. Refer to Headrest, Removing and Installing .
-- Unhook the side and upper molding strip for the cover from the rear seat backrest in the area of the locking mechanism trim using a screwdriver.
Conditions
- The help of a second person is necessary for the following procedure.
-- Press the side cover for the locking mechanism trim -2- carefully toward the outside using a commercially available plastic wedge.
-- Press and hold the hook -1- in the -direction of arrow A- using a screwdriver -3-.
-- Repeat the process on the other side.
-- Remove the locking mechanism trim -2- in the -direction of arrow B-.