Bench Seat/Single Seat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats as far forward as possible.

-- Remove the child seat anchor guides. Refer to Rear Bench Seat Cover and Cushion, Removing and Installing .

-- Slide the Removal Tool: T40445 in the area of the wire hook -2- all the way between the bench seat -1- and the bracket.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Press the Removal Tool: T40445 upward and carefully pry the bench seat -1- out of the mounting grommet -3- in the -direction of arrow A-.

-- Repeat the process for the other side in the -direction of arrow B-.

-- Raise the front side of the bench seat -1- slightly and slide the wire frame -2- out of the hook -3- in the -direction of the arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector.

-- Remove the bench seat -1-.