Seat Frame Wiring Harness, Removing And Installing: Notes
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Gauge - Gap Adjustment: 3371
- Window Release Tool: T10236
It may be helpful to make drawings or take photos of any wires that are going to be loosened, removed and then installed. This assures the wires will be reconnected correctly.
The Driver Seat Position Sensor -G553- and Passenger Seat Position Sensor -G554- will be called seat position sensor in the information that follows.
The following information describes the removing and installing on the left side of the vehicle as an example.