A-Pillar Upper Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the A-pillar gap cover. Refer to A-Pillar Gap Cover, Removing and Installing .
-- Loosen the A-pillar upper trim panel -1- from the headliner tab -2- in -direction of the arrow A- using a commercially available plastic wedge.
-- Remove the A-pillar upper trim panel -1- in the area of the clips with the hooks -3- up to the bracket stop in -direction of the arrow B-.
-- Unclip the A-pillar upper trim panel -1- in the area of the clips -4-.
-- Slide out the clips with the hooks -3- in -direction of the arrow C- from the A-pillar upper trim panel -1-.
-- Remove the A-pillar upper trim panel -1-.
-- Disconnect the connector.