Cooling System, Filling With Cooling System Charge Kit Vas 6096
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Adapter: VAS 691 005/5
- Electric Vacuum Pump: VAS 6096/2
- Cooling System Charge Device: VAS 6968
- Cooling System Charge Kit: VAS 6096
- Cooling System Tester: V.A.G 1274B
- Hose Clamps - Up To 25mm: 3094
Preparation
-- Connect all coolant hoses.
-- Screw the Adapter: VAS 691 005/5 -2- on the coolant expansion tank -1-.
-- Position the Cooling System Charge Device: VAS 6968 -F- so that it is higher than the coolant expansion tank -arrows-.
Condition
- The coolant filling device must be filled with a minimum 10 liters of coolant in the correct mixture ratio. Refer to REPLACEMENT PARTS, WORKING MATERIALS AND EXPENDABLE ITEMS .
-- Bleed the hose -G-. For this open the shut-off valve on the coolant filling device -F- and the shut-off valve -A- until the hose -G- is filled with coolant and no air is present.
-- Closes the shut-off valve -A-.
-- Open the cap -1-.