Coolant Expansion Tank, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Connect the coolant hoses and secure them with hose clamps. Pay attention to the installation position when doing so.
-- Remove the hose clamps.
-- Insert the coolant expansion tank into the mount and lock.
-- Fill the coolant and check the coolant concentration. Refer to Coolant Concentration, Checking .