Wheel, Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Installing

-- Clean the contact surface of the rims to the wheel bearing unit.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the contact surface to the rim.

-- Raise the vehicle.

-- Position the wheel.

-- Insert the wheel bolts -arrows-.

Vehicles with wheel bolt lock

-- Install the wheel bolt lock.

Continuation for all vehicles

-- Lower the vehicle.

-- Tighten the wheel bolts -arrows-.

Vehicles with wheel hubcap

-- Install the wheel hubcap.

Vehicles with wheel bolt cap

-- Install the wheel bolt cap.

Continuation for all vehicles

Tightening Specifications

Refer to WHEEL BOLTS TIGHTENING SPECIFICATION .